It is pretty easy to charge a PS3 controller. All you need is a charging cable that connects from the controller to either an open USB port on the console or directly into an AC outlet. If your controller has a mini-USB port, you can use any standard mini-USB cable.
If it has a micro-USB port, you will need a micro-USB cable. Once plugged in, the controller’s LED lights will indicate when it is fully charged (usually takes about two hours).
Sony DualShock 3 Charging Station Unboxing
- Plug the controller into the PS3 using a USB cable
- Press and hold the PS button on the controller for about 3 seconds, or until you see the light on top of the controller start flashing
- The controller is now charging and will continue to do so until it is fully charged, at which point the light on top of the controller will stop flashing and remain lit
Credit: www.amazon.com
How Do I Charge a Ps3 Controller
Assuming you would like a step-by-step guide on how to charge a PS3 controller:
1. Connect the mini USB end of the cable into the mini USB port on the front of the controller.
2. Plug the other end of the cable into an open USB port on your PS3 console.
The controller will begin charging immediately.
3. Once it has finished charging, unplug the controller from both the console and the cable.
What is the Best Way to Charge a Ps3 Controller
There are a few different ways that you can charge your PS3 controller. One way is to connect the controller to the console via a USB cable. This will allow the controller to draw power from the console and start charging.
Another way is to use a dedicated charger that plugs into an AC outlet. These chargers usually come with a mini-USB cable that you can plug into the controller to start charging. Finally, you can also use a portable battery pack to charge your controller.
Just make sure that the battery pack has enough power to fully charge your controller, as some may not have enough juice.
How Long Does It Take to Charge a Ps3 Controller
PS3 controllers can be charged in a variety of ways. The most common way is to use the included USB cable and plug it into the console. However, some gamers prefer to use an aftermarket charger, which can charge the controller faster.
It typically takes around two hours to fully charge a PS3 controller. However, if you are using an aftermarket charger, it may only take one hour. It is important to note that the battery life will vary depending on how often you use the controller and what type of batteries you are using.
Conclusion
It seems like a simple task, but if you’ve never done it before, charging a PS3 controller can be a bit confusing. Here’s a quick guide on how to do it:
First, find the mini USB port on your controller.
It’s located on the front of the controller, in between the L2 and R2 buttons. Once you’ve found it, plug the mini USB end of the cable into the port.
Next, take the other end of the cable and plug it into one of the USB ports on your PS3 console.
The console has two types of USB ports – one is for controllers and memory sticks, while the other is for charging devices. Make sure you plug it into the right port!
Once you have everything plugged in, your controller should start charging automatically.
The light on top of the controller will turn red when it’s plugged in and slowly turn green as it charges up. When it’s fully charged, the light will stay solid green. That’s all there is to it!