Cutting basketball shorts to make them shorter is a fairly easy process. First, lay the shorts out flat on a cutting surface. Next, use a measuring tape or ruler to mark the desired length you want the shorts to be.
Once the desired length is marked, cut along the line with sharp scissors. Finally, hem the raw edge of the shorts by folding it over 1/2 inch and sewing it in place with a needle and thread or by using an iron-on adhesive patch.
- Decide how much shorter you want your basketball shorts to be
- Cut the bottom hem of your shorts to the desired length
- Try on your shorts to make sure they are the right length and adjust if necessary
- Enjoy your new, shorter basketball shorts!
How to Make Shorts Shorter Without Cutting Or Sewing
Summer is the perfect time to break out the shorts, but sometimes they can be a little too long. If you’re not ready to cut or sew your shorts to make them shorter, there are a few other options. Here’s how to make shorts shorter without cutting or sewing:
1. Use fabric tape. This is an easy way to hem your shorts without any sewing required. Simply measure how much shorter you want your shorts to be and then use fabric tape to secure the new hem in place.
2. Try a hot glue gun. This method works best on denim shorts. Place a line of hot glue along the edge of the leg opening and then fold it over to create a new hemline.
The hot glue will hold everything in place while you wear your shorts.
3. Use fusible webbing tape. This is another no-sew option for heming your shorts.
Simply cut a strip of fusible webbing tape (you can find this at most craft stores) and then iron it onto the wrong side of the leg opening.
Credit: www.post-gazette.com
How Do You Shorten Long Basketball Shorts?
There are a few different ways that you can shorten long basketball shorts. The first way is to simply fold the shorts up so that they are shorter. This will usually give you about an inch or two of extra length.
Another way to shorten the shorts is to cut them off at the desired length. Be sure to use sharp scissors and cut evenly so that the shorts look uniform. You can also hem the bottom of the shorts by sewing a new seam at the desired length.
This method will take a bit more time, but it will create a professional looking finish.
Can You Make Basketball Shorts Smaller?
Are you looking to make your basketball shorts smaller? Perhaps you’ve lost weight and your current shorts are now too big, or maybe you just prefer a tighter fit. Whatever the reason, it is possible to make basketball shorts smaller.
Here are a few methods you can try:
1. Use a sew-on elastic band. This is perhaps the easiest way to make your basketball shorts smaller.
Simply purchase a sew-on elastic band (you can find these at most fabric stores) and stitch it around the waistband of your shorts. Make sure the elastic is tight but not too tight, as you don’t want it to be uncomfortable to wear.
2. Take in the sides seams.
If your basketball shorts have side seams, you can try taking them in to create a more fitted look. First, put on the shorts and mark where you want them to be taken in with chalk or a similar fabric marker. Then take them off and sew along those lines, being careful not to make the new seam too small or too large – err on the side of caution!
3. Use darts. Darts are another simple way to change up the fit of your shorts. To add darts, put on the pair of shorts and mark where you want them placed with chalk or a similar fabric marker.
Then take them off and sew along those lines, again being careful not to make the darts too small or too large – remember that less is more when it comes to darts!
4 Use gussets . Gussets are triangular pieces of fabric that are inserted into garment seams for reinforcement or extra room – they’re often used in sports garments like basketball jerseys because they allow for more range of motion without sacrificing comfort or fit .
To add gussets , simply cut out two triangles from some spare fabric (preferably something that matches your current pair of shorts) and insert them into the side seams before sewing them closed . This will give you some extra room in the hips/thigh area without making things look baggy . 5 Try let out method The let out method is exactly what it sounds like: instead of making your garment smaller , you actually let out (or loosen) certain areas so that it fits better . This can be done by either cutting away excess material (be very careful not do this!) Or by adding additional fabric via an “invisible” seam .
How Do You Shorten the Length of Shorts?
One way to shorten the length of shorts is to hem them. This can be done by hand or with a sewing machine. If you are using a sewing machine, set it to a small zigzag stitch and sew along the edge of the shorts, trimming off any excess fabric as you go.
Another way to shorten shorts is to use fabric scissors to cut them down to the desired length. Be sure to try on the shorts before cutting them, so that you know how much needs to be removed.
How Can I Make My Shorts Shorter Without Sewing?
There are a few ways that you can make your shorts shorter without sewing. One way is to simply cut them off at the desired length. Another way is to use a hemming technique called “rolling” or “turning up.”
This involves folding up the bottom of the shorts and then securing it in place with pins or tape. Once you have rolled/turned up the shorts to the desired length, you can then remove the pins or tape and wear them as normal.
The Famous Basketball Trend | Rolling WaistBand & Tucking Shorts EXPLAINED
Conclusion
If your basketball shorts are too long, don’t worry – there’s an easy way to make them shorter! All you need is a pair of scissors and a sewing machine. First, cut the shorts to the desired length.
Next, hem the raw edge of the fabric to prevent fraying. Finally, sew a new waistband onto the shorts using elastic or drawstring. And that’s it – you’ve now got a brand new pair of custom-made basketball shorts that are sure to give you a competitive edge on the court!